Why is your network slow?

Recently, I had a friend from Colorado contact me about network issues he is experiencing. He thought his question was simple. “Why does my Data VAR not know my network is in trouble?” This is a very good question that I will attempt to answer.

The first thing to keep in mind is that everything breaks. The second thing to keep in mind is the more complicated the “thing” the more difficult it is to troubleshoot and the more often it will break.

Networks are very complicated and become more even so when you factor in Internet access, VPN’s, WAN’s and the devices that use the network to communicate. The engineers that designed the protocols that run your network understood that things break and built in self-healing characteristics, namely the ability to verify if the data packet arrived to the destination and if it did not arrive to resend it until it does.

Packets that get resent may fail to arrive the second time and need to be resent again and again. This situation can lead to a problem that is far from a mathematically linear problem, but grows exponentially as more network problems arise over time. The primary way the data industry deals with this issue is to increase bandwidth. More bandwidth allows for more retransmitted packets to arrive in a shorter period of time. The term associated with a slow packet is “latency”. By increasing the amount of bandwidth available you decrease the latency within your network. We measure latency in millionths of a second. It takes about 500 milliseconds for a person to be able to notice. This is not the case with VoIP.

Your network is most likely experiencing these issues, but it is being masked by network speed. Enter VoIP, the protocol that never gets retransmitted. VoIP packets must arrive the first time. These network issues often get to the point where they affect VoIP quality and customers unfairly assume it is the VoIP supplier’s fault. Your supplier must then troubleshoot your network issues.

Recently, I used a network tool to measure the amount of communication my PC was having with our network. In ten seconds 187 instances of network communication was reported. Multiply that by the number of devices communicating an equal amount with your network and then multiply that number by the number of seconds in each day! Imagine being tasked with finding the errant network device or setting causing your poor network performance. This is why it is easier to mask the problem with speed than fix the problem. Increased bandwidth comes with an increased cost.

We now have products that will quickly determine ALL your network problems and give you a punch list of items that need to be corrected. Before you purchase a faster network, WAN Link or Internet Access consider resolving your network problems and saving your company time and money in the process.

For more information on this topic or other telecommunication issues please give me a call or send me an email.
Regards,

Craig Hodges
BSB Communications Inc.   586-859-6308 DID/Cell
craig_hodges@gobsb.com

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s